Sony SDM-S91 Operating Instructions (primary manual) - Page 20
Displaying this monitor's name, serial number, and date of manufacture., Model name: SDM-S91
View all Sony SDM-S91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Symptom Picture is fuzzy Check these items • Adjust the brightness and contrast (page 12). • Adjust the pitch and phase (page 13). Picture is ghosting Picture is not centered or sized properly Picture is too small xProblems caused by the connected computer or other equipment • Set the resolution to SXGA (1280 × 1024) on your computer. • Eliminate the use of video cable extensions and/or video switch boxes. • Check that all plugs are firmly seated in their sockets. • Adjust the pitch and phase (page 13). • Adjust the picture position (page 13). Note that some video modes do not fill the screen to the edges. • Set the zoom setting to FULL2 (page 15). The picture is dark Wavy or elliptical pattern (moire) is visible Color is not uniform White does not look white Monitor buttons do not operate ( appears on the screen) The monitor turns off after a while xProblems caused by the connected computer or other equipment • Set the computer's resolution to the screen's resolution. • Adjust the brightness (page 12). • Adjust the backlight (page 16). • It takes a few minutes for the display to become bright after turning on the monitor. • Adjust the pitch and phase (page 13). • Adjust the pitch and phase (page 13). • Adjust the color temperature (page 14). • If the menu lock is set to ON, set it to OFF (page 16). • Set the power saving function to OFF (page 16). xProblems caused by the connected computer or other equipment • Set the computer's power saving setting to off. Displaying this monitor's name, serial number, and date of manufacture. While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds. The monitor's information box appears. Press the MENU button again to make the box disappear. If any problem persists, call your authorized Sony dealer and give the following information: • Model name: SDM-S91 • Serial number • Name and specifications of your computer and graphics board. MENU Example INFORMATION MODEL : SDM-S91 SER NO : 1234567 MANUFACTURED : 2002-52 Model name Serial number Week and year of manufacture 20