Sony SEP-30BT Operating Instructions - Page 22
Pairing the Player with a Bluetooth Device
View all Sony SEP-30BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Pairing the Player with a Bluetooth Device Pairing is an operation where Bluetooth devices register with each other. Once you pair the player with a Bluetooth device, you do not need to repeat the pairing operation with the Bluetooth device again, except for the following occasions: The pairing information is erased from the player, due to, for example, repair. You pair the player with a 9th Bluetooth device. The player can be paired with up to 8 Bluetooth devices. If you pair the player with another Bluetooth device, the pairing information of the Bluetooth device that has not been connected for the longest time among the 8 Bluetooth devices will be replaced by the pairing information of the new Bluetooth device. The connection information for the player was deleted from the connected Bluetooth device. When you initialize or format the player using Rolly Choreographer, pairing information with all Bluetooth devices will be erased. Bluetooth indicator Play button Power switch 1 Place the Bluetooth device to be paired within 1 m (3 feet) of the player. 2 Set the Power switch of the player to . An operation sound sounds, and the Bluetooth indicator ( page 9) lights up in blue. 42 3 Hold the Play button of the player down for more than 7 seconds. While the player is processing the pairing, the Bluetooth indicator flashes rapidly in blue. Note The pairing process lasts about 5 minutes. If the process is interrupted before you complete operations up to step 4, perform operations from step 2 again. 4 Perform the pairing operation on the Bluetooth device to be paired, and search for the player. For details about the pairing operation, refer to the operation manual supplied with the Bluetooth device to be paired. If the Bluetooth device to be paired has a display, perform the following steps: When a list of the devices found appears, select "SEP-30BT." If "SEP-30BT" is not displayed, perform operations from step 1 again. When a passcode* is required, enter "0000" (zero-zero-zero-zero). * "Passcode" may be called "Passkey," "PIN code," "PIN number," or "Password," etc., depending on the device. When pairing is successful, the Bluetooth indicator of the player will flash slowly. Note When pairing is unsuccessful, the Bluetooth indicator does not flash slowly. If the Bluetooth indicator flashes rapidly in blue, perform step 4 again. If the Bluetooth indicator lights up and remains lit, perform operations from step 2 again. Interrupting the pairing operation Hold the Play button down for about 2 seconds. 43 Listening to Music via Bluetooth Communication