Sony SLV-340 Operating Instructions primary manual - Page 34
Operation, recording, Editing, another, continued
View all Sony SLV-340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Editing with another VCR (continued) SONY 0 • REC II PAUSE Tip • You can select a video source from the LINE IN jacks using CH +/- or INPUT SELECT. When you use CH +/-, "L" in the display window appears between the lowest program position and the highest one. Tips • To release the VCRs from pause, use the II PAUSE buttons on the VCRs so that you can edit more precisely. • To cut out unwanted scenes while editing, press II PAUSE on this VCR when an unwanted scene begins. When it ends, press II PAUSE again to resume recording (Assemble Editing). Operation (when recording on this VCR) Before you start editing • Press INPUT SELECT to display "L" in the display window. • Press TAPE SPEED on the remote commander to select the recording tape speed (SP/EP). Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press II PAUSE. 3 Press • REC on this VCR and set it to recording pause. 4 To start editing, press the II PAUSE buttons on both VCRs to release the VCRs from pause. For best results, press the pause button on the other VCR just before pressing II PAUSE on this VCR. To stop editing Press the ■ STOP buttons on both VCRs. 34 -EN Additional Operations