Sony SNT-V704 User Guide - Page 24
Controlling the Application Manually, Sending a Still Image File to an FTP Server
View all Sony SNT-V704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating the SNT-V704 Controlling the Application Manually You can send an image or output a trigger to control the alarm output, using the image control section on the main viewer page. For this function, user access right Level 3 or Level 4 is required (see page 39). Click Trigger on the menu section to display the trigger control parts. Image control section (trigger control parts) Sending a Still Image File to an FTP Server If you select FTP send and click , the current still image is captured and the captured image file is sent to the FTP server specified on the FTP client setting page. To use this function, you need to select the Enable option and the Manual mode on the FTP client setting page. For details, see "Sending Images to FTP Server - FTP client setting Page" on page 45. Sending a Still Image via E-mail If you select Mail send and click , the current still image is captured and an E-mail with the captured image file attached is sent to the E-mail address(es) specified on the SMTP setting page. To use this function, you need to select the Enable option and the Manual mode on the SMTP setting page. For details, see "Sending an Image via E-mail - SMTP setting Page" on page 49. Recording a Still Image on a USB Flash Memory or the Built-in Memory of This Unit If you select Memory save and click , the current still image is captured and stored in the memory specified on the Image memory setting page. To use this function, you need to select the Enable option and the Manual mode on the Image memory setting page. For details, see "Recording Images in Memory - Image memory setting Page" on page 53. Controlling Alarm Output If you select Alarm out 1, Alarm out 2, Alarm out 3 or Alarm out 4 and click , you can control alarm out 1 to 4 of the I/O port on this unit manually. Each click switches the relay between short-circuit and open alternately. To use this function, you need to set the Mode option of the channel selected on the Alarm out setting page to Manual. For details, see "Setting the Alarm Out - Alarm out setting Page" on page 52. For the connection of peripheral devices to the Alarm out of the I/O port, see "Pin Assignment and Use of I/O Port" on page 69. Selecting the Day/Night Mode (EVID70, SSC-DC590/DC690 only) If you select Day/Night and click , you can select the Day/Night mode. Each click switches between the day mode and night mode. To use this function, you need to select the Day/Night mode menu on the Camera setting page to Manual. For details, see "Setting the Camera - Camera setting Page" on page 32. 24 Controlling the Application Manually