Home » Sony Manuals » Video Players » Sony SNT-V704 » Manual Viewer

Sony SNT-V704 User Guide - Page 9

Connecting SSC-DC590/DC690 series, When connecting to, connector

Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Preparation Connecting SSC-DC590/DC690 series Up to four cameras can be connected to SNT-V704 at the same time. 1 Connect the t 1 to 4 connectors of SNT-V704 and the video output connector of each SSC-DC590/ DC690 series. Note When connecting cameras, connect from the t connector 1 to 4 in order. If these are connected at random, this unit may not work properly. 2 Connect the I/O port of SNT-V704 and the I/O port of each SSC-DC590/DC690 series as follows: SNT-V704 Pin 11 (+)/23 (+) Pin 12 (-)/24 (-) Pin 22 (GND) SSC-DC590/DC690 Pin 1 (+) Pin 2 (-) Pin 4 (COM) For details on the I/O port, see "Pin Assignment and Use of I/O Port" on page 69. 3 Set the ADDRESS switch of each SSC-DC590/ DC690 series as follows: - When connecting to t 1 connector, set the ADDRESS switch to "1". - When connecting to t 2 connector, set the ADDRESS switch to "2". - When connecting to t 3 connector, set the ADDRESS switch to "3". - When connecting to t 4 connector, set the ADDRESS switch to "4". Refer also to the Instruction manuals of the camera for connection of the camera. SSC-DC590/DC690 series (rear) 1,2,4 SEE INSTRUCTION MANUAL MODE DC IN/VS IN A B VIDEO OUT A MONITOR OUT I/O 1 VIDEO OUT B 2 3 4 5 6 MENU LOCK 7 OFF ON VS IN DC 12V SSC-DC590/DC690 series (rear) 1,2,4 1,2,4 SEE INSTRUCTION MANUAL MODE DC IN/VS IN A B VIDEO OUT A MONITOR OUT I/O 1 VIDEO OUT B 2 3 4 5 6 MENU LOCK 7 OFF ON VS IN DC 12V SSC-DC590/DC690 series (rear) 1,2,4 1,2,4 SEE INSTRUCTION MANUAL MODE DC IN/VS IN A B VIDEO OUT A MONITOR OUT I/O 1 VIDEO OUT B 2 3 4 5 6 MENU LOCK 7 OFF ON VS IN DC 12V SSC-DC590/DC690 series (rear) 1,2,4 1,2,4 SEE INSTRUCTION MANUAL MODE DC IN/VS IN A B VIDEO OUT A MONITOR OUT I/O 1 VIDEO OUT B 2 3 4 5 6 MENU LOCK 7 OFF ON VS IN DC 12V 75-ohm coaxial cable (not supplied) 1 RS-232C I/O 13 10, 11, 12 12 1 2 3 4 24 SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V SNT-V704 (rear) 9 Connecting the Unit

Section	Page
Table of Contents	4
Overview	6
Features	6
Precautions	7
Operating Precautions	7
How to Use This User’s Guide	7
Preparation	8
Connecting the Unit	8
Controllable cameras	8
Connecting to a Computer or a Network	10
System Requirements	10
Connecting this Unit to a Computer	10
Connecting this Unit to a Local Network	11
Connecting Power	11
Assigning the IP Address to the Unit	12
Assigning an IP address using the Setup Program	12
Accessing the Unit Using the Web Browser	14
Operating the SNT-V704	16
Logging in to Homepage - Welcome Page	16
Logging in as a User	16
Logging in as Administrator	16
About Viewers	17
Configuration of Main Viewer Page	18
Menu Section	18
Image Control Section	19
Monitor Image Section	19
Zoom Bar	19
Displaying the Monitor Images	20
Operating the Camera from the Image Control Section (BRC-300, EVI-D100, EVI-D70, and cameras not manufactured by Sony only)	21
Panning and Tilting	21
Zooming	22
Focusing	22
Moving the Camera to the Preset Position	22
Operating the Camera from the Monitor Image (Only when the BRC-300, the EVI-D100 or the EVI-D70 is connected with VISCA cable)	23
Selecting the Camera You Want to Control	23
Panning and Tilting by Clicking the Monitor Image	23
Panning, Tilting and Zooming by Specifying the Area	23
Zooming Using the Center Wheel of the Mouse	23
Zooming Using the Zoom Bar	23
Controlling the Application Manually	24
Sending a Still Image File to an FTP Server	24
Sending a Still Image via E-mail	24
Recording a Still Image on a USB Flash Memory or the Built-in Memory of This Unit	24
Controlling Alarm Output	24
Selecting the Day/Night Mode (EVI-D70, SSC-DC590/DC690 only)	24
Capturing a Monitor Image	25
Administrating the SNT-V704	26
Configuration of Administrator Menu Page	26
Configuring the System - System setting Page	28
System setting Section	28
Date time setting Section	29
Initialization Section	30
Setting the Sound - Sound setting Page	30
Sound setting Section	30
Setting the Camera - Camera setting Page	31
Camera Channel Selection Section	31
Camera setting Section	31
DynaView setting Section (SSC-DC590/DC690 only)	32
Day/Night setting Section (EVI-D70, SSC-DC590/DC690 only)	32
Camera control mode setting Section (BRC-300, EVI-D100, EVI-D70, and cameras not manufactured by Sony only)	33
Editing Messages of the Channel Display - Overlay message setting Page	34
Overlay message Channel Section	34
Overlay message Setting Section	34
Setting the Video - Video setting Page	35
Video Channel Selection	35
Video Setting Selection	35
Video Mode Selection Section	36
Configuring the Network - Network setting Page	37
Wired LAN setting Section	37
Bandwidth control selection	38
HTTP port setting Section	38
Notifying the IP Address - Dynamic IP address notification Section	38
Setting the User - User setting Page	39
Setting the Security - Security setting Page	40
Activating/Deactivating the Security Function - Security usage setting Page	40
Setting the Security Function -Securing setting Page	40
Setting the Camera Position and Action - Preset position setting Page (BRC-300, EVI-D100, EVI-D70 only)	41
Preset Channel Selection Section	41
Storing the Pan, Tilt and Zoom Positions - Position preset Section	42
Moving the Camera to the Preset Position by the Alarm - Position at alarm Section	42
Checking the Preset Position Settings - Preset position table Section	43
Programming the Tour - Tour setting Section	43
Activating the Tour - Tour selection Section	44
Checking the Tour Settings - Tour table Section	44
Sending Images to FTP Server - FTP client setting Page	45
Activating/Deactivating the FTP Client Function - FTP client usage setting Page	45
Setting the FTP Client Function - FTP client setting Page	45
Alarm mode setting Section	46
Periodical sending mode setting Section	46
Operating the Digest Viewer	47
Operating MPEG4 Player	47
Downloading Stored Images - FTP server setting Page	48
Activating/Deactivating the FTP Server Function - FTP server usage setting Page	48
Setting the FTP Server Function - FTP server setting Page	48
Sending an Image via E-mail - SMTP setting Page	49
Activating/Deactivating the SMTP Function - SMTP usage setting Page	49
Setting the SMTP Function - SMTP setting Page	49
Alarm mode setting Section	51
Periodical sending mode setting Section	51
Setting the Alarm Out - Alarm out setting Page	52
Setting the Alarm Out Function - Alarm out setting Page	52
Alarm mode setting Section	52
Timer mode setting Section	53
Recording Images in Memory - Image memory setting Page	53
Activating/Deactivating the Image Memory Function - Image memory usage setting Page	53
Recording an Image in the Selected Memory - Image memory setting Page	54
Alarm mode setting Section	55
Periodical recording mode setting Section	55
Directory Structure of Image Memory	56
Setting the Alarm Buffer - Alarm buffer setting Page	57
Alarm Buffer Channel Selection Section	57
Alarm buffer Video Mode Section	57
Alarm buffer setting Section	57
Communicating Data via Serial Port - Serial setting Page	58
Setting the Schedule - Schedule setting Page	59
Schedule setting Section	59
Schedule setting Section	59
Setting the Activity Detection Function - Activity detection setting Page	60
Setting the Activity Detection Area	60
Setting the Privacy Masking Function - Privacy masking setting Page	61
Setting the Privacy Masking Area	61
Showing the Pop-up - Pop-up setting Page	62
Others	63
Using the Supplied Setup Program	63
Starting the Setup Program	63
Bandwidth control Tab	63
Setting the Date and Time	64
Rebooting the SNT-V704	64
Assigning the IP Address to the Unit Using ARP Commands	65
Using the SNMP	66
1. Inquiry Commands	66
2. Setting Commands	66
Specifications	68
Pin Assignment and Use of I/O Port	69

Match case Limit results 1 per page

Preparation

Connecting the Unit

Connecting SSC-DC590/DC690 series

Up to four cameras can be connected to SNT-V704 at

the same time.

Connect the

1 to 4 connectors of SNT-V704 and

the video output connector of each SSC-DC590/

DC690 series.

When connecting cameras, connect from the

connector 1 to 4 in order. If these are connected at

random, this unit may not work properly.

Connect the I/O port of SNT-V704 and the I/O port

of each SSC-DC590/DC690 series as follows:

For details on the I/O port, see “Pin Assignment and

Use of I/O Port” on page 69.

Set the ADDRESS switch of each SSC-DC590/

DC690 series as follows:

–

When connecting to

1 connector

, set the

ADDRESS switch to “1”.

–

When connecting to

2 connector,

set the

ADDRESS switch to “2”.

–

When connecting to

3 connector,

set the

ADDRESS switch to “3”.

–

When connecting to

4 connector,

set the

ADDRESS switch to “4”.

Refer also to the Instruction manuals of the camera

for connection of the camera.

Note

SNT-V704

SSC-DC590/DC690

Pin 11 (+)/23 (+)

Pin 1 (+)

Pin 12 (–)/24 (–)

Pin 2 (–)

Pin 22 (GND)

Pin 4 (COM)

SEE INSTRUCTION MANUAL

MODE

MENU LOCK

OFF

DC IN/VS IN

VIDEO OUT

MONITOR OUT

VIDEO OUT

VS IN

12V

I/O

SEE INSTRUCTION MANUAL

MODE

MENU LOCK

OFF

DC IN/VS IN

VIDEO OUT

MONITOR OUT

VIDEO OUT

VS IN

12V

I/O

SEE INSTRUCTION MANUAL

MODE

MENU LOCK

OFF

DC IN/VS IN

VIDEO OUT

MONITOR OUT

VIDEO OUT

VS IN

12V

I/O

SEE INSTRUCTION MANUAL

MODE

MENU LOCK

OFF

DC IN/VS IN

VIDEO OUT

MONITOR OUT

VIDEO OUT

VS IN

12V

I/O

RS-232C

I/O

SEE INSTRUCTION MANUAL

CLASS 2 WIRING

DC 12V

SSC-DC590/DC690 series (rear)

75-ohm coaxial

cable (not supplied)

SNT-V704 (rear)

SSC-DC590/DC690 series (rear)

1,2,4

10, 11, 12