Sony SPP-S2430 Operating Instructions - Page 14
ENTER HOME, AREA CODE., To change the home area code
![]() |
View all Sony SPP-S2430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Step 4: Entering the area code (continued) 4 Press Jog Button (ENTER) again. "ENTER HOME AREA CODE." appears on the display. ENTER HOME AREA CODE. _ 5 Enter the three digits of your home area code using the dialing keys. 6 Press (PROGRAM). You hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 3. To enter a different home area code, see "To change the home area code" below. • Do not allow more than 20 seconds to elapse during the operation procedure. • If the area code has not been entered, calling back from the Caller ID list and storing the Caller ID data into the Phone Directory cannot be performed. • If the home area code is not correctly entered, "SEND TO CORDLESS HANDSET FAILED." will appear on the display and five short error beeps will be heard after (PROGRAM) is pressed in step 6. Move the cordless handset closer to the base phone, and then start over the procedure. Tips • When you select "[GO BACK]", you can return to the previous set display by pressing Jog Button (ENTER). • You may press Jog Button (ENTER) instead of (PROGRAM) in step 6. • To check the current home area code, perform steps 1 to 3. The home area code appears on the display for about 20 seconds. To change the home area code 1 Performsteps1to4onpages13to14. The current home area code appears on the display. 2 Press (ERASE)toerasethecurrenthomeareacode. 3 Enteranewhomeareacodeusingthedialingkeys. 4 Press (PROGRAM). You hear a long confirmation beep. To erase the home area code You can erase the home area code. Perform steps 1 and 2 above, then press (PROGRAM). The home area code will be erased, and you hear a long confirmation beep. 14US Getting Started
![](/manual_guide/products/sony-spps2430-operating-instructions-cf57286/14.png)