Sony SPP-S2730 Operating Instructions - Page 40
Additional tasks, Receiving calls continued
View all Sony SPP-S2730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Receiving calls (continued) Additional tasks To Do this Adjust the cordless handset volume Put a call on hold Switch to another call ("call waiting" service*) Set the VOL switch to H (high), M (middle) or L (low). Press (HOLD). "HOLD" appears on the display. Press (HOLD) again or pick up the cordless handset from the charger (When Quick talk is set to "ON"; see below) to resume the conversation. Press (CALL WAITING/FLASH). Press (CALL WAITING/FLASH) again to return to the first caller. Receive a call by only picking up the cordless handset from the charger, without pressing (TALK)(Quick talk) Press (PGM). Turn Jog Dial to choose "QUICK TALK", then press Jog Dial. Turn Jog Dial to choose "ON", then press Jog Dial. Adjust the ringer volume of the cordless handset While the cordless handset is ringing: Turn Jog Dial to adjust the volume. While the cordless handset is not in use: Press (PGM). Turn Jog Dial to choose "RINGER VOLUME" then press Jog Dial to adjust the volume. Press (OFF). The ringer volume can be adjusted to three different levels: high, low and off. If the ringer is set off, "RING OFF" will appear on the display. * You need to subscribe to this service from your telephone company. Tip To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer volume on the cordless handset to off. You can still make calls, and also receive calls if another telephone connected to the same line rings to inform you of incoming calls. You can also receive an intercom call. If you have subscribed to the Caller ID service; • the caller's number and/or name appears on the display when you receive a call (see page 60) or when another call comes in by "call waiting" service. • the name stored in the Phone Directory appears on the display if the call matches the number stored in the Phone Directory (memory match function; see page 60). • the ringer sound changes to a higher tone if the call matches the number stored in the Phone Directory (memory match function; see page 60). 40US Basics