Sony SPP-S2730 Operating Instructions - Page 51

To transfer all phone numbers from the Phone Directory The Phone Directory receiving the transfer will be totally overwritten. 1 Press (PGM). (Press (PROGRAM) on the base phone.) 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Press Jog Dial. (GO BACK) SEND ALL DIR ERASE ALL CID NEW OLD MASSAGE RING OFF 4 When the system has one cordless handset Skip this step. Telephone Features When the system has an additional cordless handset Turn Jog Dial to choose "TO BASE" or station number of the cordless handset to which you are forwarding the memory, and then press Jog Dial. (Cordless handset) (GO BACK) TO BASE TO HANDSET 2 NEW OLD MASSAGE RING OFF 5 Turn Jog Dial to choose "SEND DIRECTORY", and then press Jog Dial. "SENDING..." appears on the display during the transfer. You hear a long confirmation beep and the entire memory is transferred. (GO BACK) NO SEND DIRECTORY NEW OLD MASSAGE RING OFF Notes • If there are already 50 numbers stored in the Phone Directory receiving the transferred number one by one from the other Phone Directory, "RECEIVER'S MEMORY IS FULL" will appear on the display and five short error beeps will be heard to indicate that the transfer was unsuccessful. To make the transfer possible, erase one of the stored phone numbers existing in the Phone Directory (see page 49). • If the transfer is unsuccessful, "ERROR" will appear on the display, and five short error beeps will be heard. Move the sending unit closer to the receiving unit, make sure the receiving unit is not in use, and then start over the procedure. • To check the station number assigned to the cordless handset, see page 26. Telephone Features 51US