Sony SRS-XB01 Help Guide - Page 40

About the indicators

Page 40 highlights

Help Guide Wireless Speaker SRS-XB01 About the indicators Charge indicator (orange) Turns off Lights up Flashes slowly Flashes 3 times and turns off The speaker has completed charging. The speaker is being charged. The built-in battery is running at less than 10% and needs to be charged. If the charge indicator flashes 3 times and goes off when you turn on the speaker, the built-in battery is empty and needs to be charged. Note A speaker that is in use can be charged if it is connected to an AC outlet via a USB AC adaptor (commercially available), or connected to a booted computer. In this case, it may take longer to charge the built-in battery depending on the conditions of use. Therefore, it is recommended to turn off the speaker when charging. When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to an AC outlet via a USB AC adaptor (commercially available), or connected to a booted computer. As a result, sound becomes low. This is not a malfunction. Turn off the speaker and charge the built-in battery sufficiently. In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the speaker stop. To resolve these issues, disconnect the micro-USB cable from the speaker and connect it again within an operating temperature between 5 °C and 35 °C (41 °F and 95 °F). Power/BLUETOOTH indicator (blue) Lights up The speaker is connected to a BLUETOOTH device. Flashes quickly (3 times The speaker enters the pairing mode. a second) Flashes slowly The speaker is waiting for a BLUETOOTH device to connect to. Flashes once Each time you press the -/+ (volume) button, the indicator flashes once. Flashes 3 times When you operate the -/+ (volume) button and the volume is set at the lowest or highest level, the indicator flashes 3 times. Related Topic Parts and controls 4-742-784-11(1) Copyright 2018 Sony Corporation 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59

Help Guide
Wireless Speaker
SRS-XB01
About the indicators
Charge indicator (orange)
Note
A speaker that is in use can be charged if it is connected to an AC outlet via a USB AC adaptor (commercially available), or
connected to a booted computer. In this case, it may take longer to charge the built-in battery depending on the conditions of use.
Therefore, it is recommended to turn off the speaker when charging.
When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to
an AC outlet via a USB AC adaptor (commercially available), or connected to a booted computer. As a result, sound becomes
low. This is not a malfunction. Turn off the speaker and charge the built-in battery sufficiently.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the
speaker stop. To resolve these issues, disconnect the micro-USB cable from the speaker and connect it again within an operating
temperature between 5 °C and 35 °C (41 °F and 95 °F).
Power/BLUETOOTH indicator (blue)
Related Topic
Parts and controls
4-742-784-11(1) Copyright 2018 Sony Corporation
Turns off
The speaker has completed charging.
Lights up
The speaker is being charged.
Flashes slowly
The built-in battery is running at less than 10% and needs to be charged.
Flashes 3 times
and turns off
If the charge indicator flashes 3 times and goes off when you turn on the speaker, the built-in
battery is empty and needs to be charged.
Lights up
The speaker is connected to a BLUETOOTH device.
Flashes quickly (3 times
a second)
The speaker enters the pairing mode.
Flashes slowly
The speaker is waiting for a BLUETOOTH device to connect to.
Flashes once
Each time you press the -/+ (volume) button, the indicator flashes once.
Flashes 3 times
When you operate the -/+ (volume) button and the volume is set at the lowest or highest
level, the indicator flashes 3 times.
40