Sony SS-CNP700 Operating Instructions - Page 49
Using the Remote, Changing button assignments
View all Sony SS-CNP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using the Remote Changing button assignments You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the DVD jacks on the receiver, you can set the DVD button on this remote to control the DVD recorder. 1 Hold down the input button of which you want to change the assignment. Example: Press DVD. 2 Referring to the table below, press the corresponding button for the category you want. Example: Press 4. Now you can use the DVD button to control the DVD recorder. Categories and the corresponding buttons Categories VCR (command mode VTR 3)a) VCR (command mode VTR 2)a) Press 1 2 DVD player/DVD recorder 3 (command mode DVD1)b) DVD recorder 4 (command mode DVD3)b) CD player 5 MD deck 6 Tape deck B 7 Tuner (this receiver) 8 DVR (Digital CATV terminal) 9 DSS (Digital Satellite Receiver) 0/10 a)Sony VCRs are operated with a VTR 2 or VTR 3 setting which correspond to 8 mm and VHS respectively. b)Sony DVD recorders are operated with a DVD 1 or DVD 3 setting. For details, refer to the operating instructions supplied with the DVD recorders. To clear all remote button assignments Press ?/1, AUTO CAL and MASTER VOL - at the same time. The remote is reset to its factory settings. Using the Remote 49US