Sony STR-D311 Operating Instructions - Page 4
Precautions, Overview, Unpacking, Hooking, System
View all Sony STR-D311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Precautions Unpacking On safety • For USA and Canadian models, operate the unit only on 120 V AC. 60 Hz. • For Australian model, operate the unit only on 240 V AC. 50 Hz. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Unplug the unit from the wall outlet if it is not to be used for an extended period of time To disconnect the cord. pull it out by grasping the plug. Never pull the cord itself. • One blade of the plug is wider than the other for the purpose of safety and will fit into the power outlet only one way. If you we unable to insert the plug fully into the outlet, contact your dealer. (not applicable to Australian custoers) • AC power cord must be changed only at the qualified service shop. • This unit is not disconnected from the AC power source as long as it is connected to the mains outlet, even dine unit itself has been turned off On operation Before making program source connections, be sure to turn the power switch off and unplug the unit. On cleaning the cabinet Clean the cabinet. panel and controls ton a solt cloth lightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. For the customer. In the U.S.A. For detailed safety precautions, see the IMPORTANT SAFEGUARDS' leaflet. If you have any question or problem concerning your unit. please consult your newest Sony dealer. Overview To prevent Internal heat buildup In the unit, place the unit in a location with adequate air circulation. Do not Install the unit: • near heat sources such as radiators or air ducts. • in a place subject to direct sunlight, excessive dust, mechanical vibration or shock Do not piece anything on top of the cabinet. The top ventilation holes must be unobstructed for the proper operation of the unit and to prolong the life of 4s components. Do not throw away the carton and packing material! It will be an ideal container when transporting the system for repair work. en. Checking the Supplied Accessories After unpacking, check that the following accessories are present • FM wire antenna • AM loop antenna (1) • Remote commander RM-S103 (1) • Sony batteries SUM-3 (NS) (2) Selecting the AM Tuning Interval (Except for Australian Model/ The AM tuning interval is preset to 10 kHz. To use the receiver where the frequency allocation system is based on a 9 kHz interval, make the following adjustments. 1 Turn on the coiner and tune into any AM station. 2 Turn off the power. 3 Press the POWER button while pressing Me TUNING button To reset the AM tuning Intel/el, repeat the above steps. Caution When the interval is changed, all preset stations which you have memorized will be erased. After changing the interval, be sure to preset the stations again. The STR-D311 is an FM Stereo/FM-AM receiver and you can listen to various authoNideo program sources with this unit Tuner • Precise tuning is ensured by a quartz locked digital synthesizer. • A total of 30 FM/AM stations can be preset in 3 memory pages (A, B and C) that allow you to clasnify stations. Remote commander • The supplied remote ggiornander allows you to remotely control this unit. Hooking Up the System Connecting Equipment TAPE deck 2 Turntable CD player TAPE deck 1 or DAT deck • The red jacks of the receiver are for righlohannet (R) connections and ore while jacks for left-channel (L) • The cable connectors should be fully inserted into the lacks Leese connection may cause hum and noise. Connecting the FM/A1/1 Antennas Note on power source connection Be careful that the power consumption d equipment connected to rte outlet on the recever does not exceed 120 cans tor USA and Canada models or 100 walls for Austral.) model. Do not connect electrical home appliances such as an 'teethe ken. Ian. TV. or other high-wattage equipment to Mese outlets. Connecting the Antenna Ground ale To prevent hum, connect the ground one to ANTENNA ground leonine' (do) When an outdoor antenna is installed, be sure to canned the ground wire for lightning protection Connecting Speakers AR antenna Atust the direction. Supplied CM loop antenna Noe An no speakers A and B are connect., in series, the spAtl volume will be Oahu), decreased with been speaker systems driven.