Sony STR DA2400ES Operating Instructions - Page 19
a: Connecting the audio components, How to hook up your, components
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started Notes • Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio signals will be transmitted. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted. In this case, place the antenna (aerial) farther away from the receiver. Tips • The receiver has a video conversion function. For details, see "Notes on converting video signals" (page 33). • The sound of the TV is output from the speakers connected to the receiver if you connect the audio output jack of the TV to the TV IN jacks of the receiver. In this configuration, set the sound output jack of the TV to "Fixed" if it can be switched between either "Fixed" or "Variable". • All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. 4a: Connecting the audio components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to "Component to be connected" below for the pages which describe how to connect each component. After hooking up all your components, proceed to "5: Connecting the antennas (aerials)" (page 35). Component to be connected Super Audio CD player, CD player With digital audio output With multi channel audio output With analog audio output only MD deck, Tape deck, With analog audio Analog disc turntable output only DIGITAL MEDIA PORT adapter Page 20 22 23 23 20 Notes • Before connecting cords, make sure to disconnect the AC power cord (mains lead). • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. 19US