Sony STR DA2400ES Service Manual - Page 102
Micon, Board, Ic8014, Mb91f467rapmc-ge1 System Controller
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
STR-DA2400ES/DG920 MICON BOARD IC8014 MB91F467RAPMC-GE1 (SYSTEM CONTROLLER) Pin No. Pin Name I/O Description 1 VSS - Ground terminal 2 POW-SW_DET I POWER switch input terminal 3 SIRIUS_PWR_ENABLE O Sirius power detection signal output to the SIRIUS socket (DA2400ES: US model only) 4 to 7 NO USE O Not used 8 EVOL_CLK O Serial data transfer clock signal output to the electrical volume 9 EVOL_DATA O Serial data output to the electrical volume 10 PREOUT_RY O Relay drive signal (for preout (DA2400ES only)) and (for subwoofer (DG920 only)) output terminal "H": relay on 11, 12 VCC3_(3.3V) - Power supply terminal (+3.3V) 13 VSS_(GND) - Ground terminal 14 C_1 - External capacitor connection terminal for internal regulator 15 2ND_RY O Relay drive signal (for 2nd zone preout) output terminal Not used 16 BRAVIA _SEL O TV IN/PHONO IN selection signal output terminal "L": PHONO IN, "H": TV IN 17 HP_RY O Relay drive signal (for headphone) output terminal "H": relay on 18 SB_RY O Relay drive signal (for surround back) output terminal "H": relay on 19 SR_RY O Relay drive signal (for surround) output terminal "H": relay on 20 C_RY O Relay drive signal (for center) output terminal "H": relay on 21 SP_B_RY O Relay drive signal (for front B) output terminal "H": relay on 22 SP_A_RY O Relay drive signal (for front A) output terminal "H": relay on 23 4/8_RY O Relay drive signal (for speaker impedance 4/8 ohm selection) output terminal "L": 4 ohm, "H": 8 ohm 24 LED_DCS O LED drive signal output terminal for Digital Cinema Sound indicator "H": LED on 25 LED_MLT O LED drive signal output terminal for MULTI CHANNEL DECODING indicator "H": LED on 26 LED_MLT_DIM O Dimmer control signal output terminal for MULTI CHANNEL DECODING indicator 27 LED_STB O LED drive signal output terminal for ON/STANDBY indicator "L": green LED on (power on mode), "H": red LED on (standby mode) 28, 29 NO USE O Not used 30 TRG-1 O Trigger signal output terminal Not used 31 to 34 NO USE O Not used 35 MIC_ON O Microphone muting on/off control signal output terminal "H": muting on 36 VCC3_(3.3V) - Power supply terminal (+3.3V) 37 C_2 - External capacitor connection terminal for internal regulator 38 VSS_(GND) - Ground terminal 39 X0_ (CLOCK_IN) I Main system clock input terminal (4 MHz) 40 X1_(CLOCK_OUT) O Main system clock output terminal (4 MHz) 41 VSS_(GND) - Ground terminal 42 X0A_ (SUB_CLOCK_ IN) I Sub system clock input terminal Not used 43 X1A_(SUB_CLOCK_ OUT) O Sub system clock output terminal Not used 44 VCC3_(3.3V) - Power supply terminal (+3.3V) 45 VSS_(GND) - Ground terminal 46 VOL_2 I Jog dial pulse input from the rotary encoder (B phase input) (for MASTER VOLUME) 47 VOL_1 I Jog dial pulse input from the rotary encoder (A phase input) (for MASTER VOLUME) 48 FUNC_2 I Jog dial pulse input from the rotary encoder (B phase input) (for INPUT SELECTOR) 49 FUNC_1 I Jog dial pulse input from the rotary encoder (A phase input) (for INPUT SELECTOR) 50 TUNE_2 I Jog dial pulse input from the rotary encoder (B phase input) (for TUNING) 51 TUNE_1 I Jog dial pulse input from the rotary encoder (A phase input) (for TUNING) 52 TONE_2 I Jog dial pulse input from the rotary encoder (B phase input) (for TONE) 53 TONE_1 I Jog dial pulse input from the rotary encoder (A phase input) (for TONE) 54 HP_IN I Headphone plug insert detection signal input terminal "H": headphone plug is inserted 55 DA_MD0 I Serial data input from the D/A converter (for audio section) 56 DA_LATCH O Serial data latch pulse signal output to the D/A converter (for audio section) 57 VCC3_(3.3V) - Power supply terminal (+3.3V) 58 VSS_(GND) - Ground terminal 59 SYSTEM_MUTE O System muting on/off control signal output terminal Not used 60 DAC_MUTE O Muting control signal output terminal 61 DIR_DATA0 I Audio serial data input from the digital audio interface receiver 62 DIR_XMODE O Reset signal output to the digital audio interface receiver "L": reset 102