Sony STR DA2400ES Service Manual - Page 12

STR-DA2400ES/DG920 About the indicators on the display window 12 Name Function " SW Lights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack. While this indicator lights up, the receiver creates a subwoofer signal based on the LFE signal in the disc being played back or the low frequency components of the front channels. # LFE Lights up when the disc being played back contains an LFE (Low Frequency Effects) channel and the LFE channel signal is actually being reproduced. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. $ COAX Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack. % OPT Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack. &  D/  D EX/  D+/  TrueHD " D" lights up when the receiver is decoding Dolby Digital signals. " D EX" lights up when the receiver is decoding Dolby Digital Surround EX signals. " D+" lights up when the receiver is decoding Dolby Digital Plus signals. " TrueHD" lights up when the receiver is decoding Dolby TrueHD signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is set to "AUTO". ' Neural-THX Lights up when the receiver applies Neural-THX processing to input signals. ( DTS/ DTS-ES/ DTS 96/24 "DTS" lights up when the receiver is decoding DTS signals. "DTS-ES" lights up when the receiver is decoding DTS-ES signals. "DTS 96/24" lights up when the receiver is decoding DTS 96/24 (DTS 96 kHz/24 bit) signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is set to "AUTO". Name Function ) D.RANGE Lights up when dynamic range compression is activated. * CAT Lights up when category (DA2400ES: US/ mode is selected during the DG920) satellite radio operation. + SP A/SP B/ SP A+B Lights up according to the speaker system used (page 44). However, these indicators do not light up if the speaker output is turned off or if headphones are connected. , Tuner indicators Lights up when using the receiver to tune in radio stations, etc. - SLEEP Lights up when the sleep timer is activated. . A.DIRECT Lights up when the receiver is processing Analog Direct signals. / SIRIUS Lights up when the SiriusConnect Home tuner is connected and "SIRIUS" is selected. 0 MEM Lights up when a memory function, such as Preset Memory etc., is activated. 1 XM (DA2400ES: US/ DG920) Lights up when XM MiniTuner and Home Dock are connected and "XM" is selected. 2  PL/  PL II/  PL IIx " PL" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. " PL II" lights up when the Pro Logic II decoder is activated. " PL IIx" lights up when the Pro Logic IIx decoder is activated. However, these indicators do not light up if both the center and surround speakers are not connected and you select a sound field using the A.F.D. button. Note Dolby Pro Logic IIx decoding does not function for signals with a sampling frequency of more than 48 kHz. 3 BI-AMP (DA2400ES) Lights up when BI-AMP Speaker setting is set to "ON". 4 EQ Lights up when the equalizer is activated. 5 NEO:6 Lights up when DTS Neo:6 Cinema/Music decoding is activated. Name Function 6 DTS-HD "DTS-HD MSTR" lights up MSTR/ when the receiver is DTS-HD HI decoding DTS-HD Master RES Audio signals. "DTS-HD HI RES" lights up when the receiver is decoding DTS-HD High Resolution signals. 7 LPCM Lights up when Linear PCM signals are detected. 8 ANALOG Lights up when - INPUT MODE is set to "AUTO" and no digital signal is being input through the COAXIAL, OPTICAL or HDMI jacks. - INPUT MODE is set to "ANALOG". - the "Analog Direct" is being used. 9 DMPORT Lights up when DIGITAL MEDIA PORT adapter is connected and "DMPORT" is selected. : MULTI IN Lights up when multi channel input is selected. ; HDMI Lights up when the receiver recognizes a component connected via an HDMI IN jack. XK Playback channel indicators L R C SL SR S SBL SBR SB The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Surround Back Left Surround Back Right Surround Back (the surround back components obtained by 6.1 channel decoding) Example: Recording format (Front/ Surround): 3/2.1 When Speaker Pattern is set to "3/0.1" Sound Field: A.F.D. AUTO