Sony STR-DA3000ES Operating Instructions (STRDA3000ES) - Page 31

About the indications in the display 12 34 5 6 78 9 q; qa qs qd Amplifier Operation SW L C R INPUT AUTO I.LINK ;RF COAX OPT ANALOG MULTI CH IN 1 2 SLEEP L.F.E. SL S SR ;DIGITAL EX DTS-ES 96/24 D.RANGE ;PRO LOGIC II NEO:6 DISCRETE H.A.T.S. SB DEC RDS EQ SBL SB SBR MOVIE MUSIC CINEMA MATRIX STEREO MONO MEMORY wf wd ws wa w; ql qk qj qh qg qf A SW: Lights up when sub woofer selection is set to "YES" (page 20). While this indicator lights up, the receiver creates a sub woofer signal based on the LFE signal in the disc being played back or the low frequency components of the front channels. This indicator does not light during the 2CH STEREO mode. B Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)), SBL (Surround back Left), SBR (Surround back right), SB (Surround Back (the surround back components obtained by 6.1 channel decoding)) Example: Recording format (Front/Surround): 3/2 Output channel: Surround speakers absent Sound Field: A.F.D. AUTO A.F.D. 2CH SW in the SURR SET UP menu: CREATE (The initial setting is "OFF") SW L C R SL SR C ; DIGITAL (EX): Lights up when Dolby Digital signals are input. "EX" lights up when Dolby Digital EX signals are input. When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to "ANALOG 2CH FIXED" (page 39). D INPUT: Lights up constantly. One of the input indicators also lights up according to the current input. E AUTO: Lights up when INPUT MODE is set to "AUTO 2CH" (page 39). F DTS (-ES): Lights up when DTS signals are input. "-ES" lights up when DTS-ES signals are input. When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to "ANALOG 2CH FIXED" (page 39). G COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal or when INPUT MODE is set to "COAXIAL FIXED" (page 39). H OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal, or when INPUT MODE is set to "OPTICAL FIXED" (page 39). I ANALOG: Lights up when no digital signal is input to COAXIAL or OPTICAL jack, or when INPUT MODE is set to "ANALOG 2CH FIXED" (page 39). J MULTI CH IN 1/2: Lights up when "MULTI CH 1 DIRECT" or "MULTI CH 2 DIRECT" is selected. K SB DEC: Lights up when surround back decoding is activated (page 36). L SLEEP: Lights up when sleep timer is activated. M D.RANGE: Lights up when dynamic range compression is activated (page 46). N EQ: Lights up when the equalizer is activated. continued 31GB