Sony STR-DB1070 Operating Instructions (primary manual) - Page 45

Adjustments using the SET UP button, STR-DB1070, MULTI CH 1 or 2. You cannot

Get Sony STR-DB1070 - Fm Stereo/fm-am Receiver PDF manuals and user guides View all Sony STR-DB1070 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Other Operations Tip • You can freely specify the time. After pressing SLEEP, specify the time you want using the jog dial and cursor buttons ( or ) on the receiver. The sleep time changes in 1 second intervals. You can specify up to 5 hours. • To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display. Adjustments using the SET UP button The SET UP button allows you to make the following adjustments. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings Parameter Initial setting 6.1CH DECODING AUTO MULTI CH (1 or 2) NONE D.POWER ALWAYS ON V.POWER AUTO OFF S.FIELD LINK ON A1 AUTO POWER ON AUTO FUNCTION ON 2ND ROOM SP1) OFF COMMAND MODE2) AV1 COLOR SYSTEM3) PAL OSD4) COLOR OSD H.POSITION4) 4 OSD V.POSITION4) 4 1) Only when the center or surround back speaker is set to "2ND ROOM" (STR-DB1070 area code U, CA only). 2) Except for STR-DB870 area code CEL. 3) STR-DB1070 of area code other than U, CA only. 4) STR-DB1070 only. x 6.1ch Matrix (6.1CH DECODING) You can set this parameter using 6.1CH DECODING on the front panel. • When set to "AUTO", the receiver performs 6.1 channel matrix decoding only if 6.1 channel signals decode flag is ON. • When set to "ON", the receiver performs 6.1 channel matrix decoding only if the surround signals are 2 channel, regardless of the 6.1 channel decode flag. • When set to "OFF", the receiver does not perform 6.1 channel matrix decoding. • During "A.F.D.", this parameter is always set to "AUTO", and you cannot change the setting. • When the 6.1 channel matrix decoding is performed and the surround back speaker is set to "NO", you can enjoy the surround back signals with virtual 3D technology, even without an actual surround back speaker (the box around SB does not light up). If the surround back speaker is set to "YES", the surround back signals are output through the actual speaker (SB and the box lights up). (For STR-DB870) Please note that you can set the surround back speaker only when the center speaker is set to "NO" (page 20). x Multi channel assignment (MULTI CH (for STR-DB1070, MULTI CH 1 or 2)) Lets you assign a function to MULTI CH (for STR-DB1070, MULTI CH 1 or 2). You cannot assign TUNER or PHONO. For STR-DB1070, you cannot assign the same function to both MULTI CH 1 and 2. continued 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
45
Other Operations
Tip
•
You can freely specify the time. After pressing
SLEEP, specify the time you want using the jog dial
and cursor buttons (
or
) on the receiver. The
sleep time changes in 1 second intervals. You can
specify up to 5 hours.
•
To check the remaining time before the receiver
turns off, press SLEEP.
The remaining time
appears in the display.
Adjustments using the
SET UP button
The SET UP button allows you to make the
following adjustments.
1
Press SET UP.
2
Press the cursor buttons (
or
) to
select the parameter you want to
adjust.
3
Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
Initial setting
6.1CH DECODING
AUTO
MULTI CH (1 or 2)
NONE
D.POWER
ALWAYS ON
V.POWER
AUTO OFF
S.FIELD LINK
ON
A1 AUTO POWER
ON
AUTO FUNCTION
ON
2ND ROOM SP
1)
OFF
COMMAND MODE
2)
AV1
COLOR SYSTEM
3)
PAL
OSD
4)
COLOR
OSD H.POSITION
4)
4
OSD V.POSITION
4)
4
1) Only when the center or surround back speaker is
set to “2ND ROOM” (STR-DB1070 area code U,
CA only).
2) Except for STR-DB870 area code CEL.
3) STR-DB1070 of area code other than U, CA only.
4) STR-DB1070 only.
x
6.1ch Matrix (6.1CH DECODING)
You can set this parameter using 6.1CH
DECODING on the front panel.
•
When set to “AUTO”, the receiver performs
6.1 channel matrix decoding only if 6.1 channel
signals decode flag is ON.
•
When set to “ON”, the receiver performs
6.1 channel matrix decoding only if the
surround signals are 2 channel, regardless of the
6.1 channel decode flag.
•
When set to “OFF”, the receiver does not
perform 6.1 channel matrix decoding.
•
During “A.F.D.”, this parameter is always set to
“AUTO”, and you cannot change the setting.
•
When the 6.1 channel matrix decoding is
performed and the surround back speaker is set
to “NO”, you can enjoy the surround back
signals with virtual 3D technology, even
without an actual surround back speaker (the
box around SB does not light up). If the
surround back speaker is set to “YES”, the
surround back signals are output through the
actual speaker (SB and the box lights up).
(For STR-DB870) Please note that you can set
the surround back speaker only when the center
speaker is set to “NO” (page 20).
x
Multi channel assignment (MULTI
CH (for STR-DB1070, MULTI CH 1 or
2))
Lets you assign a function to MULTI CH (for
STR-DB1070, MULTI CH 1 or 2). You cannot
assign TUNER or PHONO.
For STR-DB1070, you cannot assign the same
function to both MULTI CH 1 and 2.
continued