Sony STR-DE595 Operating Instructions - Page 26

Understanding the multi channel surround displays 1 23 4 5 67 8 SP SP A SP B aDIGITAL aPRO LOGIC II DTS OPT COAX LCR D.RANGE SW L F E qs qa 0 SL S SR MEMORY STEREO MONO RDS SLEEP 9 qf qd 1 SW: Lights up when sub woofer selection is set to "YES" (page 17) and the audio signal is output from the SUB WOOFER jacks. 2 SP*: (STR-DE495 only) Lights up when you turn on the receiver. 3 SP A*: (STR-DE595 only) Lights up when you select to drive Speaker System A. 4 SP B*: (STR-DE595 only) Lights up when you select to drive Speaker System B. * Does not light up when you connect headphones to the PHONES jack. 5 ; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format. 6 ; PRO LOGIC II: "; PRO LOGIC" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when Pro Logic II processing ("PLII MOV" or "PLII MUS") is applied (page 24). However, both indicators do not light up if the center and surround speakers are set to "NO", and "A.F.D. AUTO" or "DOLBY PL" is selected. Note Dolby Pro Logic and Dolby Pro Logic II decoding does not function for DTS format signals. 7 DTS: Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to "ANALOG" (page 21). 8 Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 29-33 for tuner operations. Note "RDS" only appears for models of area code CEL, CEK only. 9 SLEEP: Lights up when sleep timer is activated. 0 D.RANGE: Lights up when dynamic range compression is activated. See page 27 to adjust the dynamic range compression. qa COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal. qs OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 26GB