Sony STR-DE698 Operating Instructions - Page 59

Additional Information Models of area code AR Rated Power Output at Stereo Mode (8 ohms 20 Hz - 20 kHz, THD 0.09%) 80 W + 80 W1) 70 W + 70 W3) (8 ohms 1 kHz, THD 0.7%) 100 W + 100 W1) 90 W + 90 W3) (8 ohms 1 kHz, THD 10%) 120 W + 120 W1) 110 W + 110 W3) Reference Power Output1) (8 ohms 20 Hz - 20 kHz, THD 0.09%) FRONT2): 110 W/ch CENTER2): 110 W SURR2): 110 W/ch SURR BACK2): 110 W/ch (8 ohms 1 kHz, THD 0.7%) FRONT2): 120 W/ch CENTER2): 120 W SURR2): 120 W/ch SURR BACK2): 120 W/ch (8 ohms 1 kHz, THD 10%) FRONT2): 150 W/ch CENTER2): 150 W SURR2): 150 W/ch SURR BACK2): 150 W/ch 1) Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz CEL, CEK, AR 230 V AC, 50 Hz E2/E3, AU 240 V AC, 50 Hz 2) Depending on the sound field settings and the source, there may be no sound output. 3) Measured under the following conditions: Area code AR Power requirements 220 V AC, 50 Hz Frequency response MULTI CH IN, SA-CD/ CD, MD/TAPE, DVD, AUX, VIDEO 1, 2, 3 10 Hz - 70 kHz +0.5/-2 dB (with sound field and equalizer bypassed) Inputs (Analog) MULTI CH IN, SA-CD/ CD, MD/TAPE, DVD, AUX, VIDEO 1, 2, 3 Sensitivity: 500 mV Impedance: 50 k ohms S/N4): 96 dB (A, 500 mV5)) 4) INPUT SHORT (with sound field and equalizer bypassed). 5) Weighted network, input level. Inputs (Digital) DVD, SA-CD/CD (Coaxial) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) VIDEO 2, 3, MD/TAPE, SA-CD/CD (Optical) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs (Analog) MD/TAPE (OUT), Voltage: 500 mV VIDEO 1 (AUDIO OUT) Impedance: 10 k ohms SUB WOOFER Voltage: 2 V Impedance: 1 k ohm Outputs (Digital) MD/TAPE (Optical) Sensitivity: - Equalizer Gain levels ±6 dB, 1 dB step continued 59GB