Sony STR-DE698 Operating Instructions - Page 60

FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz Sensitivity Mono: 18.3 dBf, 2.2 µV/75 ohms Stereo: 38.3 dBf, 22.5 µV/75 ohms Useable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono: 76 dB Stereo: 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1,710 kHz6) With 9-kHz tuning scale: 531 - 1,710 kHz6) Models of area code E2/E3 With 10-kHz tuning scale: 530 - 1,610 kHz6) With 9-kHz tuning scale: 531 - 1,602 kHz6) Models of area code CEL, CEK, AU With 9-kHz tuning scale: 531 - 1,602 kHz Models of area code AR With 10-kHz tuning scale: 530 - 1,610 kHz Antenna Loop antenna Intermediate frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5% (50 mV/m, 400 Hz) Selectivity At 9 kHz: 35 dB At 10 kHz: 40 dB 6) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: S-video: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms 60GB COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through General Power requirements Area code U, CA CEL, CEK AU AR E2/E3 Power requirements 120 V AC, 60 Hz 230 V AC, 50/60 Hz 240 V AC, 50 Hz 220 - 230 V AC, 50/60 Hz 120/220/240 V AC, 50/60 Hz Power consumption Area code U, CEL, CEK, AU, E2/E3, AR CA Power consumption 230 W 310 VA Power consumption (during standby mode) 0.2 W AC outlets (Except for models of area code AR) Area code AC outlets U, CA 1 switched, 120 W/1A MAX CEL, CEK, E2/E3, AU 1 switched, 100 W MAX Dimensions (w/h/d) (Approx.) 430 × 157.5 × 370 mm (16 7/8 × 6 2/8 × 14 4/8 inches) including projecting parts and controls Mass (Approx.) 9.0 kg (19 lb 14 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) Remote commander RM-AAP001 (1) R6 (size-AA) batteries (2) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice.