Sony STR-DE898 Operating Instructions - Page 49
Selecting the command mode of the remote, Selecting the command mode, To check the command mode
View all Sony STR-DE898 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Operations Using the Remote RM-AAL001 Remote Button x qd O ws V/v ws B/b ws V/v/B/b ws -/-- wg 2ND 3 Operations Function VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck/ Blu-ray disc recorder/ Hard disc recorder/PSX Stops playback. VCD player/ Returns to the previous LD player/ menu or exits the menu. DVD player/ Satellite tuner/ Blu-ray disc recorder/ Hard disc recorder/PSX Receiver Selects a menu item. Receiver Adjusts or changes the setting. VCR/ Selects a menu item. Satellite tuner/ DVD player TV/ Selects the channel Satellite tuner/ entry mode, either one Blu-ray disc or two digit. recorder/ Hard disc recorder/PSX Remote Selects the command mode of the remote. Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • To activate the buttons with orange printing, press ALT first before pressing the buttons. • When you press input buttons (VIDEO1, VIDEO2, VIDEO3, TV/SAT or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV. Selecting the command mode of the remote Set the remote command mode using the RM SET UP button and the remote command mode buttons. Selecting the command mode You can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Press AV1 or AV2 while holding down RM SET UP. The indicator flashes once (twice for AV2) , then the command mode switches. To check the command mode of the remote Press RM SET UP. You can check the remote by the indicator. Mode AV1 AV2 Indicator flashes once twice To reset the remote to factory settings Press ?/1, AV ?/1 and MASTER VOL - at the same time. The indicator flashes 3 times, then goes off. Note If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 59. 49GB