Sony STR-DG1000 Operating Instructions - Page 39
: Setting the speakers, To switch the command mode, of the RM-AAL003 remote - receiver turns on
UPC - 027242699908
View all Sony STR-DG1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting Started To switch the command mode of the RM-AAL003 remote 1 2 3 6: Setting the speakers Setting the speaker impedance Set the appropriate speaker impedance for the speakers you are using. 1 2 1 Press ?/1 while pressing RM SET UP. The RM SET UP button flashes. 2 Press 1 or 2 while the RM SET UP button is flashing. When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2. 3 Press ENTER when the RM SET UP button lights up. The RM SET UP button flashes twice, then the command mode setting process is completed. Tip When you press RM SET UP, use a thin wire, such as a paper clip. 4-6 3,7 1 Turn on the receiver. 2 Press RECEIVER. Receiver operation is enabled. 3 Press MENU. The list of setting menus appears. 4 Press V/v repeatedly to select "System Settings," then press to enter. 5 Press V/v repeatedly to select "SP. IMPEDANCE," then press to enter the parameter. continued 39GB