Sony STR-DG1000 Operating Instructions - Page 79
Resetting sound fields to the initial settings, a different speaker than - problems
UPC - 027242699908
View all Sony STR-DG1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker displayed screen The location where you set up the speaker (for example, the front speaker position) and type of the speaker terminal you connected (for example, the surround back speaker terminal) are different. Check the speaker allocation. For more precise adjustment You can output the test tone or sound source from two adjacent speakers to adjust their balance and level. Then select the two speakers you want to adjust by selecting "PHASE NOISE" or "PHASE AUDIO" in step 6. Resetting sound fields to the initial settings 1,2 2 1 Press POWER to turn off the power. 2 While holding down MUSIC, press POWER. "S.F. Initialize" appears on the display and all sound fields are reset to their initial setting. Enjoying Surround Sound 79GB