Sony STR-K900 Service Manual - Page 5

STR-K880/K900 About the indicators on the display STR-K880 model 123 4 5 67 8 SW LFE SP A ;DIGITAL EX ;PRO LOGIC IIx DTS-ES NEO:6 SP B SLEEP OPT COAX HDMI 96/24 D.RANGE LCR SL S SR SB qg qf qd qs qa RDS MEMORY STEREO MONO q; qh 9 Name A SW B LFE C SP A/SP B D ;DIGITAL (EX) E ;PRO LOGIC (II)/ (IIx) Function Lights up when the audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up according to the speaker system used. However, these indicators do not light up if the speaker output is turned off or if a headphone is connected. Lights up when Dolby Digital signals are input. "; DIGITAL EX" lights up when Dolby Digital Surround EX signals are decoded. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when the Pro Logic II Movie/Music/ Game decoder is activated. "; PRO LOGIC IIx" lights up when the Pro Logic IIx Movie/ Music/Game decoder is activated. Note Dolby Pro Logic IIx decoding does not function for DTS format signals or for signals with a sampling frequency of more than 48 kHz. Name F DTS (-ES)/ (96/24) G NEO:6 H MEMORY I Preset station indicators J Tuner indicators K D.RANGE L HDMI* M COAX Function Lights up when DTS signals are input. "DTS-ES" lights up when DTS-ES signals are input. "DTS 96/24" lights up when the receiver is decoding DTS 96 kHz/24 bit signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". Lights up when DTS Neo:6 Cinema/Music decoder is activated. Lights up when a memory function, such as Preset Memory, etc., is activated. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations. Lights up when using the receiver to tune in radio stations, etc. Note "RDS" appears for models of area code AEP, UK only. Lights up when dynamic range compression is activated. Flashes when you select "HDMI A." in the VIDEO menu. Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to "COAX IN". Name N OPT O SLEEP P Playback channel indicators L R C SL SR S SB Function Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to "OPT IN". Lights up when the sleep timer is activated. The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Surround back (the surround back components obtained by 6.1 channel decoding) Example: Recording format (Front/ Surround): 3/2.1 Sound Field: A.F.D. AUTO SW LCR SL SR * Except for models of area code E51. 5