Sony STR-K900 Service Manual - Page 6

STR-K880/K900 About the indicators on the display STR-K900 model 123 4 5 6 7 SW LFE SP A ;DIGITAL ;PRO LOGIC II DTS SP B SLEEP OPT COAX HDMI LCR SL S SR qf qd qs qa qg MEMORY D.RANGE STEREO MONO q; 9 8 Name A SW B LFE C SP A/SP B D ;DIGITAL E ;PRO LOGIC (II) Function Lights up when the audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up according to the speaker system used. However, these indicators do not light up if the speaker output is turned off or if a headphone is connected. Lights up when Dolby Digital signals are input. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when the Pro Logic II Movie/Music/ Game decoder is activated. Note Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals. Name F DTS G MEMORY H Preset station indicators I Tuner indicators J D.RANGE K HDMI L COAX M OPT Function Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". Lights up when a memory function, such as Preset Memory., etc., is activated. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations. Lights up when using the receiver to tune in radio stations, etc. Lights up when dynamic range compression is activated. Flashes when you select "HDMI A." in the VIDEO menu. Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to "COAX IN". Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to "OPT IN". Name N SLEEP O Playback channel indicators L R C SL SR S Function Lights up when the sleep timer is activated. The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Example: Recording format (Front/ Surround): 3/2.1 Sound Field: A.F.D. AUTO SW LCR SL SR 6