Sony STR-K990 Operating Instructions - Page 32

Performing Auto Calibration TV RM SET UP AV ?/1 ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER AUX DMPORT RECEIVER 2CH A.F.D. MOVIE MUSIC ?/1 switch Input buttons RECEIVER SLEEP FM MODE D.TUNING AUTO CAL 123 AUTO CAL 456 7 - /- - CLEAR >10 GUIDE 89 0/10 ENTER MEMORY DISPLAY V < B B MUTING v RETURN/ EXIT MENU OPTIONS TOOLS REPLAY ADVANCE .< > TUNING - TUNING + m H M DISC SKIP X x TV VOL TV CH MASTER VOL PRESET MUTING MASTER VOL +/- DVD Press AUTO CAL. Measurement starts in 5 seconds and the display changes as follows: A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] While the time is counting down, stand away from the measurement area to avoid measurement error. The table below shows the display when measurement starts. Measurement for Display Environment noise level Speaker connection Speaker level NOISE.CHK MEASURE and SP DET. appears alternately* MEASURE and GAIN appears alternately* Speaker distance MEASURE and DISTANCE appears alternately* * The corresponding speaker indicator lights up in the display during measurement. The measurement process will take a few minutes to complete. When measurement ends, "COMPLETE" appears on the display and the settings are registered. After you have finished Disconnect the optimizer microphone from the receiver. Note Auto Calibration cannot detect the sub woofer. Therefore, all sub woofer settings will be maintained. Tip The Auto Calibration function will be canceled when you do the following during the measurement process: - Press ?/1, input buttons or MUTING. - Change the volume level. - Press AUTO CAL again. 32US