Sony STR-K990 Operating Instructions - Page 35
When a test tone is not output, from the speakers, T. TONE N. - problems
View all Sony STR-K990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Getting Started 1 Press RECEIVER. The RECEIVER indicator lights up and receiver operation is activated. 2 Press MENU. "1-LEVEL" appears on the display. 3 Press or b to enter the menu. 4 Press V/v repeatedly to select "T. TONE". 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Sub woofer 7 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 43). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display during adjustment. 8 Repeat steps 1 to 6 to select "T. TONE N". You can also press any input buttons. The test tone turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. 35US