Sony STRDA3500ES Operating Instructions - Page 48
Press, repeatedly to select, Yes, then press, the Auto Calibration type, then, to exit., Parameter
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3 Press B/b repeatedly to select "Yes", then press . 5 Press b. The exit screen appears. 4 Press V/v repeatedly to select the Auto Calibration type, then press . The measurement results are saved. Parameter Explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. OFF Sets the Auto Calibration EQ to off. 6 Press to exit. Note The frequency response measurement result is not utilized in the following cases. - The multi channel input is selected. - "2ch Analog Direct" is being used. - Dolby TrueHD signals with a sampling frequency of 176.4 kHz and higher are being received. - PCM signals with a sampling frequency of 176.4 kHz and higher are being received. Tip The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. 48US