Sony SU-LW1 Instructions (SU-LW1 Wall-Mount Bracket) - Page 18

Mount the display on the Plate, Unit.

Get Sony SU-LW1 PDF manuals and user guides View all Sony SU-LW1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

3 1 2 4 3 Do not push the screws in too far. Mount the display on the Plate Unit. 1To lock the arms temporarily, put the two securing screws (+B5 × L12, supplied) in the holes on the arm bases B from the outside. 2Hang the upper hooks of the Mounting Hook Units on the upper shafts of the arms. 3Place the lower hooks of the Mounting Hook Units on the lower shafts of the arms. 4Pushing the display towards the Plate Unit, lift it up slowly and hang the lower hooks of the arms onto the lower shafts. 5Check to make sure that all eight hooks are properly hung on the corresponding shafts. 6Tighten the securing screws attached in 1. Note If you push the securing screws into the holes too far (1), the tips of the screws will get in the way when you hang the lower hooks on the shafts (4). 6 18 (US)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
18
(US)
3
1
2
3
4
6
Mount the display on the Plate
Unit.
1
To lock the arms temporarily, put the two
securing screws (+B5
×
L12, supplied) in the
holes on the arm bases
B
from the outside.
2
Hang the upper hooks of the Mounting Hook
Units on the upper shafts of the arms.
3
Place the lower hooks of the Mounting Hook
Units on the lower shafts of the arms.
4
Pushing the display towards the Plate Unit,
lift it up slowly and hang the lower hooks of
the arms onto the lower shafts.
5
Check to make sure that all eight hooks are
properly hung on the corresponding shafts.
6
Tighten the securing screws attached in
1
.
Note
If you push the securing screws into the holes
too far (
1
), the tips of the screws will get in the
way when you hang the lower hooks on the
shafts (
4
).
Do not push
the screws in
too far.