Sony TDM-BT1 Instruction Manual - Page 13

Troubleshooting If you run into any problems using this unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer. No sound , Check the connection between this unit and the stereo audio output device connected to this unit. , Check that both this unit and the BLUETOOTH stereo audio source device are turned on. , Ensure that this unit is not too far from the BLUETOOTH stereo audio source device, or this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven. , Check that the BLUETOOTH connection is made properly between this unit and the BLUETOOTH stereo audio source device. , Turn up the volume of the stereo audio output device. , Turn up the volume of the BLUETOOTH stereo audio source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device. , Pair this unit and the BLUETOOTH stereo audio source device again. Low sound level , Turn up the volume of the BLUETOOTH stereo audio source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device. , Turn up the volume of the stereo audio output device. Distorted sound , Turn down the volume of the BLUETOOTH stereo audio source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device. Sound skips or the correspondence distance is short. , If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away from such sources. , Remove any obstacle between this unit and other BLUETOOTH device or move away from the obstacle. 13 US