Sony TDM-BT1 Instruction Manual - Page 7

OPERATING THE UNIT Using the unit Preparation 1 Connect the DIGITAL MEDIA PORT cable of this unit to the DIGITAL MEDIA PORT jack of a stereo audio output device (DAV series, etc.). Make sure the output device is turned off before connecting. To DIGITAL MEDIA PORT jack DMPORT RESET This unit Stereo audio output device 2 Turn on the stereo output device with a DIGITAL MEDIA PORT jack (DAV series, etc.) connected to this unit, and select the DIGITAL MEDIA PORT input. The LED status indicator lights up for 2 seconds to indicate "Ready." Pairing What is pairing? BLUETOOTH devices need to be "paired" with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit can be paired with up to 8 BLUETOOTH stereo audio source devices. If a new device is paired thereafter, the device with the oldest registration among the 8 paired devices is replaced by the new one. Continued 7 US