Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 16

To connect/disconnect the unit Connecting 1 Connect the DIGITAL MEDIA PORT cable of this unit to the AV system with DIGITAL MEDIA PORT interface (Sony DAV series, etc.). Make sure the AV system is turned off before connecting. Note According to your area's TV system, switch the NTSC/PAL selector on the bottom of the unit. NTSC/PAL selector 2 Turn on the AV system connected to the unit, and switch the AV system function to DMPORT. Disconnecting Before disconnecting, turn off the AV system. Otherwise, this unit cannot backup settings correctly. STEP 7: Connecting the TDM-NC1 to the network Select your desired network setting from the following three options. - Wired setting , select Case A. - Wireless setting (but the unit is not installed near computer) , select Case B. Note You can set up the wireless setting by starting your computer web browser. See Case C (page 18). Also, if your wireless access point settings are applied under one of the following settings, you need to select Case C. - If you set wireless network key (WEP key) to other than "WEP key No. 1". - If you set the access point's SSID not to transmit (stealth mode). MENU m/M ENTER ./> +/- 16GB