Sony UBP-X1000ES Operating Instructions - Page 3

This label is located on the laser protective housing inside the enclosure. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. PRECAUTIONS • To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. • Install this unit so that the AC power cord can be unplugged from the wall socket immediately in the event of trouble. • This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 metres. • Place the player in a location with adequate ventilation to prevent heat build-up in the player. • To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. • Do not expose the appliance to naked flame sources (for example, lighted candles). • Do not install this player in a confined space, such as a bookshelf or similar unit. • Sufficient space around the player is needed to release heat. When placing the player in a rack, leave more than 44.45 mm (1.75 in) space above the player, and more than 44.45 mm (1.75 in) space along the sides of the player. The rack behind the player should be open. If you place the player with its back against the wall, leave more than 88.9 mm (3.5 in) space between the player and the wall. • Use "WS-UBPRE1" Rack Mount Kit to mount the player on a rack mount. • Do not place the player near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place the player outdoors, in vehicles, on ships, or on other vessels. • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates. • Do not install the player in an inclined position. It is designed to be operated in a horizontal position only. • Do not place metal objects in front of the front panel. It may limit reception of radio waves. • Do not place the player in a place where medical equipment is in use. It may cause a malfunction of medical instruments. • If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function. • Do not place heavy or unstable objects on the player. • Do not place any objects other than discs on the disc tray. Doing so may cause damage to the player or the object. • Take out any discs from the tray when you move the player. If you don't, the disc may be damaged. • Disconnect the AC power cord and all other cables from the player when you move the player. • The player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off. • Disconnect the player from the wall outlet if you are not going to use the player for a long time. To disconnect the AC power cord, grasp the plug itself; never pull the cord. • Observe following points to prevent the AC power cord being damaged. Do not use the AC power cord if it is damaged, as doing so may result in an electric shock or fire. - Do not pinch the AC power cord between the player and wall, shelf, etc. - Do not put anything heavy on the AC power cord or pull on the AC power cord itself. 3