Sony UHP-H1 Operating Instructions - Page 40
Others, The System Power-Off function does
View all Sony UHP-H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Settings] to [On] (page 33). Refer to the instruction manual supplied with the AV amplifier (receiver). The System Power-Off function does not work (BRAVIA Sync). , Check that [Control for HDMI] and [Linked to TV-off] in [HDMI Settings] are set to [On] and [Valid] (page 33). Others Playback does not start from the beginning of content. , Press OPTIONS, and select [Play from beginning]. Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory depending on the disc when - you open the disc tray. - you disconnect the USB device. - you play other content. - you turn off the player. Message Code 1 [Playback stopped. The content being played is protected by Cinavia and is not authorized for playback on this device. For more information, see http://www.cinavia.com. Message Code 1] appears on the screen when playing a disc. , The audio track of the video that you are playing contains a Cinavia code indicating it was intended for presentation using professional equipment only and is not authorized for playback by consumers (page 5). The disc tray does not open and "LOCK" or "D ON" appears on the front panel display. , When "LOCK" appears, the player is locked. To cancel the Child Lock, press x STOP, HOME, and then TOP MENU button on the remote until "UNLCK" appears on the front panel display (page 11). , When "D ON" appears, contact your Sony dealer or local authorized Sony service facility. The disc tray does not open and you cannot remove the disc even after you press Z. , While the player is turned on, press x STOP, HOME, and then TOP MENU button on the remote to unlock the tray and disable the Child Lock (page 11). , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5Disconnect and reconnect the AC power cord again to recover the player. "Exxxx" or "TEMP" appears on the front panel display. , When "Exxxx" appears, contact your nearest Sony dealer or local authorized Sony service facility and give the error code. , When "TEMP" appears, place the player in a location with adequate ventilation to prevent heat build-up in the player. "TEMP" will appear for a short time. 40