Sony UP-27MD Operating Instructions - Page 13
Information display, Monitor display
View all Sony UP-27MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Rear RS-232C connector (page 16) Connects to a computer for controlling the printer. 3G-SDI (HD/SD) (SDI video signal) input connector (page 15) Connects to video equipment with SDI signal output connectors. Both SD and HD signals are supported. For details, see "Supported signal formats" (page 23). Caution Do not come into contact with this terminal and patients at the same time. Doing so may result in a generation of voltage that can be harmful to patients if the unit is malfunctioning. Always disconnect the power cord before connecting and disconnecting connectors. 3G-SDI (HD/SD) (SDI video signal) output connector (page 16) Connects to video equipment with SDI signal input connectors. Both SD and HD signals are supported. For details, see "Supported signal formats" (page 23). Caution Do not come into contact with this terminal and patients at the same time. Doing so may result in a generation of voltage that can be harmful to patients if the unit is malfunctioning. Always disconnect the power cord before connecting and disconnecting connectors. AC IN connector (page 15) Connects to the power cord. Equipotential connector Brings the all devices connected to the printer to the same potential. Information display Once the POWER switch is turned on and operations are possible, the following screen is displayed. Monitor display When the printer is connected to a video monitor the following information is displayed on the monitor display. For detailed information on the menu, see "Menu Configuration" (page 48). This manual mainly uses screen displays for explanations. Caution Do not come into contact with this terminal and patients at the same time. Doing so may result in a generation of voltage that can be harmful to patients if the unit is malfunctioning. Always disconnect the power cord before connecting and disconnecting connectors. REMOTE connector (stereo mini jack) (page 16) Connects to an FS-24 Foot Switch (not supplied). Printer Error : 56 Check Paper: Load Printer Information Please Wait Printing Memory Printer Information Press any button 1 AM 4 2ı 50 Page A Printing 1/1 13