Sony VPCJ112FX VPCJ1 Series Hard Disk Drive Replacement Instructions - Page 1

VPCJ1 Series Hard Disk Drive Replacement Instructions IMPORTANT! PLEASE READ BEFORE YOU START These easy instructions will guide you through the Hard Drive replacement process. Before you begin, place your computer on a clean or covered surface to avoid damage to the computer's case.* Follow the ESD (Electrostatic Discharge) damage prevention instructions: o Hold parts by the edges, away from exposed circuitry when possible. o Do not walk around excessively as this promotes static build-up. Before you begin, remove any jewelry you may be wearing to prevent scratches to the surface of your computer.* The appearance of the electronic components shown in the illustrations may differ from the components shipped. This slight difference does not affect the accuracy of these instructions. * Sony is not responsible for damage caused by incorrect handling of the computer. Hard Drive Assembly Prepare the Computer CAUTION: Make sure the computer is turned off, and the AC Adapter is disconnected. Failure to do so can result in damage to the computer. Stand Hard Drive Removal (Steps 2-6) Step 2. Using the enclosed magnetic screwdriver, remove the four (4) screws securing the stand. Step 3. Grasp the stand handle and pull upwards to remove the stand. Step 1. Place the computer upside down Put aside the Stand Screws to re- on a protected surface with the front secure the Stand later in the edge facing you. procedure. P/N 989201986 Rev. B 1/3