Sony VPL-CS2 Operating Instructions - Page 24
clean the air filter every 300 hours, To turn off the power
View all Sony VPL-CS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
To turn off the power 1 Press the I / 1 key. "POWER OFF? Please press I / 1 key again." appears to confirm that you want to turn off the power. Note A message disappears if you press any key except the I / 1 key, or if you do not press any key for five seconds. 2 Press the I / 1 key again. The ON/STANDBY indicator flashes in green and the fan continues to run for about 90 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 30 seconds. During this time, you will not be able to light up the ON/STANDBY indicator with the I / 1 key. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red. When you cannot confirm the on-screen message When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about one second. Note Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop even though the internal heat is still high, which could result in a breakdown of the projector. To stow the adjuster on the bottom If you are not going to use the projector, while holding the RELEASE button pressed, fold up the adjuster on the bottom of the projector manually. On air filter To maintain optimal performance, clean the air filter every 300 hours. GB 24 Projecting