Sony VPL-CS2 Operating Instructions - Page 35

Warning Messages, Caution Messages, Symptom, Cause and Remedy, Message, Meaning and Remedy

Get Sony VPL-CS2 PDF manuals and user guides View all Sony VPL-CS2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Maintenance Others Symptom Cause and Remedy The LAMP/COVER indicator flashes. • The lamp cover or the air filter cover is detached. c Attach the cover securely (see page 31). The LAMP/COVER indicator lights up. • The lamp has reached the end of its life. c Replace the lamp (see page 31). • The lamp becomes a high temperature. c Wait for 90 seconds to cool down the lamp and turn on the power again (see page 31). The FAN/TEMP indicator • The fan is broken. flashes. c Consult with qualified Sony personnel. The FAN/TEMP indicator • The internal temperature is unusually high. lights up. c Check to see if nothing is blocking the ventilation holes. Both the LAMP/COVER • The electrical system breaks down. and FAN/TEMP indicators c Consult with qualified Sony personnel. light up. Warning Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy High temp.! Lamp off in 1 min. • Internal temperature is too high. c Turn off the power. c Check to see if nothing is blocking the ventilation holes. Frequency is out of range! • This input signal cannot be projected as the frequency is out of the acceptable range of the projector. c Input a signal that is within the range of the frequency. • The resolution setting of the output signal of a computer is too high. c Set the setting of output to SVGA (VPL-CS2) or XGA (VPLCX1) (see page 16). Please check INPUT-A setting. • You have input RGB signal from the computer when INPUT-A in the SET SETTING menu is set to COMPONENT. c Set INPUT-A correctly (see page 30). Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message NO INPUT Not applicable! Meaning and Remedy • No input signal c Check connections (see page 16). • You have pressed the wrong key. c Press the appropriate key. Troubleshooting 35 GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
35
GB
Troubleshooting
Maintenance
Others
Warning Messages
Use the list below to check the meaning of the messages displayed on the screen.
Caution Messages
Use the list below to check the meaning of the messages displayed on the screen.
Symptom
Cause and Remedy
The LAMP/COVER
indicator flashes.
• The lamp cover or the air filter cover is detached.
c
Attach the cover securely (see page 31).
The LAMP/COVER
indicator lights up.
• The lamp has reached the end of its life.
c
Replace the lamp (see page 31).
• The lamp becomes a high temperature.
c
Wait for 90 seconds to cool down the lamp and turn on the
power again (see page 31).
The FAN/TEMP indicator
flashes.
• The fan is broken.
c
Consult with qualified Sony personnel.
The FAN/TEMP indicator
lights up.
• The internal temperature is unusually high.
c
Check to see if nothing is blocking the ventilation holes.
Both the LAMP/COVER
and FAN/TEMP
indicators
light up.
• The electrical system breaks down.
c
Consult with qualified Sony personnel.
Message
Meaning and Remedy
High temp.!
Lamp off in 1 min.
• Internal temperature is too high.
c
Turn off the power.
c
Check to see if nothing is blocking the ventilation holes.
Frequency is out of range!
• This input signal cannot be projected as the frequency is out of the
acceptable range of the projector.
c
Input a signal that is within the range of the frequency.
• The resolution setting of the output signal of a computer is too
high.
c
Set the setting of output to SVGA (VPL-CS2) or XGA (VPL-
CX1) (see page 16).
Please check INPUT-A
setting.
• You have input RGB signal from the computer when INPUT-A in
the SET SETTING menu is set to COMPONENT.
c
Set INPUT-A correctly (see page 30).
Message
Meaning and Remedy
NO INPUT
• No input signal
c
Check connections (see page 16).
Not applicable!
• You have pressed the wrong key.
c
Press the appropriate key.