Sony VPL CS6 Operating Instructions - Page 42
Cleaning the Air Filter, less than five seconds each: RESET - reset lamp
UPC - 027242627024
View all Sony VPL CS6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 Insert the new lamp all the way in until it is securely in place. Tighten the screws. Fold the handle. Disposal of the used lamp As the used lamp contains Mercury, dispose of the lamp according to local, state or federal laws. As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp. Cleaning the Air Filter The air filter should be cleaned every 300 hours. Remove dust from the outside of the ventilation holes with a vacuum cleaner. Notes • Be careful not to touch the glass surface of the lamp. • The power will not turn on if the lamp is not secured properly. 5 Close the lamp cover and tighten the screws. 6 Turn the projector back over. 7 Connect the power cord. The ON/ STANDBY indicator around the =/1 key lights in red. 8 Press the following keys on the remote commander in the following order for less than five seconds each: RESET,