Sony VPL-CX3 Operating Instructions - Page 23
clean the air filter every 300 hours, To turn off the power
UPC - 027242578531
View all Sony VPL-CX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting Up and Projecting To turn off the power 1 Press the I / 1 key. "POWER OFF? Please press I / 1 key again." appears to confirm that you want to turn off the power. Note A message disappears if you press any key except the I / 1 key, or if you do not press any key for five seconds. 2 Press the I / 1 key again. The ON/STANDBY indicator flashes in green and the fan continues to run for about 90 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you will not be able to light up the ON/STANDBY indicator with the I / 1 key. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red. When you cannot confirm the on-screen message When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about one second. Note Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop even though the internal heat is still high, which could result in a breakdown of the projector. On air filter To maintain optimal performance, clean the air filter every 300 hours. Projecting 23 GB