Sony VPL ES3 Operating Instructions - Page 14
Connecting the Projector, Connecting a Computer - projector manual
UPC - 027242689664
View all Sony VPL ES3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting the Projector To connect a computer Rear side When you connect the projector, make sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out by the plug, not the cable itself. Connecting a Computer This section describes how to connect the projector to a computer. For more information, refer to the computer's instruction manual. INPUT AUDIO S VIDEO VIDEO AUDIO INPUT A/B INPUT A INP to monitor output Computer to audio output 14 Connecting the Projector 1 HD D-sub 15-pin cable (supplied) 2 Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) Notes • For stereo audio connection, connect the stereo audio connecting cable to the AUDIO connector for VPL-ES3, or to the AUDIO INPUT A/B connector for VPL-EX3. • The projector accepts VGA, SVGA, XGA, SXGA, and SXGA+ signals. However, we recommend that you set the output mode of your computer to SVGA (VPL-ES3) or XGA (VPL-EX3) mode for the external monitor. • If you set your computer, such as a notebook computer, to output the signal to both your