Sony VPL ES3 Operating Instructions - Page 31

The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INSTALL SETTING V Keystone: 0 Image Flip: Off Background: Blue Lamp Mode: Standard High Altitude Mode:Off Security Lock: Off Input-A Setting items V Keystone Image Flip Background Lamp Mode High Altitude Mode Security Lock Functions Initial setting Corrects the trapezoidal distortion caused by the projection 0 angle using the v/V/b/B keys on the Remote Commander. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Flips the image on the screen horizontally and/or vertically. Off • Off: The image does not flip. • HV: Flips the image horizontally and vertically. • H: Flips the image horizontally. • V: Flips the image vertically. Selects the background color of the screen when no signal Blue is input to the projector. Select "Black" or "Blue." Normally, set to "Blue." This setting becomes effective when the menu is cleared after setting of the background color. Sets the lamp brightness used during the projection. • High: Illuminates the projected image brightly. • Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the "High" setting. Standard Set to "On" when the projector is used at an altitude of Off 1,500 m or higher. Turns on the projector's security lock function. Off When set to "On," turns on the security lock function, which locks the projector once a password has been set. For details, see "Security Lock" on page 20. Adjustments and Settings Using a Menu The INSTALL SETTING Menu 31