Sony VPL ES3 Operating Instructions - Page 17

Projecting the Picture 4 Press the INPUT key to select the input source. Each time you press the key, the input signal switches as follows: Input-A t INPUT B t Video t S-Video (VPL-EX3 only) F7 or Fx and Fn To input from Press INPUT to display Computer/Component Input-A connected to the INPUT A connector Computer connected to Input-B the INPUT B connector Video equipment Video connected to the VIDEO input connector Video equipment connected to the S VIDEO input connector S-Video Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly. Notes • If "Auto Input Search" is set to "On," the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found. For details, see "Auto Input Search" on page 28. • The Smart APA feature is effective for the input signal from a computer only. 5 Switch the equipment connected to output to the projector. Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., / , LCD VGA / , etc.), or by changing your computer's settings. Note The key used for switching the computer to output to the projector varies depending on the type of computer. 6 Adjust the upper or lower position of the picture. Use the adjuster to adjust the picture position. Using the adjuster Lift the projector while pressing the adjuster adjustment button, and adjust the tilt of the projector, then release the button to lock the adjuster. Adjuster adjustment button Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector with the adjuster out. It may be occurred malfunction. 7 Adjust the trapezoidal distortion ( ) of the picture. Press the KEYSTONE key on the Remote Commander to display the adjustment menu and adjust the tilt using the v/V/ b/B keys. Projecting 17