Sony VPL-EW130 Operating Instructions - Page 13
signal is input from a computer APA Auto Pixel Alignment, Automatically adjusts Phase
View all Sony VPL-EW130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Projecting/Adjusting an Image Changing the aspect ratio of the projected image Press ASPECT on the remote commander to change the aspect ratio of the projected image. You can also change the setting in Aspect of the INPUT SETTING menu (page 17, page 18). Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted. In this case, set keystone manually. 1 Press KEYSTONE on the remote commander or select V Keystone in the INSTALL SETTING menu. 2 Use V/v/B/b to set the value. The higher the setting, narrower the top of the projected image. The lower the setting, the narrower the bottom. Increase the number towards plus Note Since the Keystone adjustment is an electronic correction, the image may be deteriorated. Increase the number towards minus Automatically adjusts Phase, Pitch and Shift of projected image while a signal is input from a computer (APA (Auto Pixel Alignment)) Press APA on the remote commander. Press again to cancel during the setting. If Smart APA is set to On, executes APA automatically when a signal is input (page 19). Projecting an Image 13