Sony VPL-EW130 Operating Instructions - Page 6

PIC MUTING key Cuts off the image. Press again to restore the image. AUDIO MUTING key Mutes the audio output. Press again to restore the previous volume. VOLUME +/- key For adjusting the volume output. FREEZE key*2 Pauses a projected image. Press again to restore the image. Notes *1: Use this key when inputting a computer signal. But it may not be used depending on the resolution of the input signal. *2: Use this key when inputting a computer signal. f Setting the energy-saving mode easily ECO MODE key Energy-saving mode can be set easily. Energy-saving mode consists of "Lamp Mode," "Power Saving Mode" and "Standby Mode." 1 Press the ECO MODE key to display the ECO Mode menu. ECO Mode Menu ECO Mode ECO User Sel: Exit: 2 Press the V/v key or ECO MODE key to select ECO or User mode. ECO: Sets each mode to the optimum energy-saving value. Lamp Mode: Low Power Saving Mode: Standby Standby Mode: Low (go to step 6) User: Sets each item of the energysaving mode menu as you desire (go to step 3). 3 Select "User" then press the b key. The setting items appear. User Lamp Mode Power Saving Mode Standby Mode Standard Off Low Sel: Set: Exit: 4 Press the V/v key to select the item then press the ENTER key. 5 Press the V/v key to select the setting value. 6 Press the ENTER key to restore the User screen. For details on ECO Mode settings, see "Lamp Mode" (page 21) and "Standby Mode" (page 21) on the INSTALL SETTING menu and "Power Saving Mode" (page 19) on the SET SETTING menu. Others g Infrared transmitter About Remote Commander operation • Direct the Remote Commander toward the remote control detector. • The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the Remote Commander can control the projector becomes. • Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. 6 Location and Function of Controls