Sony VPL-EX120 Operating Instructions - Page 12
Automatically adjusts Phase, Pitch and Shift of projected image while
View all Sony VPL-EX120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Changing the aspect ratio of the projected image Press ASPECT on the remote commander to change the aspect ratio of the projected image. You can also change the setting in Aspect of The Screen Menu (page 16, page 17). Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted. In this case, set keystone manually. 1 Press KEYSTONE on the remote commander or select V Keystone in The Installation Menu. 2 Use V/v/B/b to set the value. The higher the setting, narrower the top of the projected image. The lower the setting, the narrower the bottom. Increase the number towards plus Note Since the Keystone adjustment is an electronic correction, the image may be deteriorated. Increase the number towards minus Displaying a pattern for adjusting an image You can display a pattern for adjusting the projected image with the PATTERN key on the Remote Commander. Press the PATTERN key again to restore the previous image. Automatically adjusts Phase, Pitch and Shift of projected image while a signal is input from a computer (APA (Auto Pixel Alignment)). Press APA on the remote commander. Press again to cancel during the setting. You can also set APA in The Screen Menu (page 16). If Smart APA is set to On, executes APA automatically when a signal is input (page 18). 12 Projecting an Image