Sony VPL EX3 Operating Instructions - Page 28
The SET SETTING Menu
UPC - 027242689671
View all Sony VPL EX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
The SET SETTING Menu The SET SETTING menu is used for changing the settings of the projector. SET SETTING Input-A Smar t APA: On Auto Input Search: Off Input-A Signal Sel.: Component Color System: Auto Power Saving: Off IR Receiver: Front & Rear Panel Key Lock: Off Setting items Functions Initial setting Smart APA The APA (Auto Pixel Alignment) automatically On adjusts "Dot Phase," "H Size" and "Shift" on the INPUT SETTING menu for the input signal from a computer. • On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the "Smart APA," it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if "Smart APA" set to "On." • Off: The APA functions when you press the APA key on the Remote Commander. Auto Input Search When set to "On," the projector detects input signals in Off the following order: Input-A/Input-B (VPL-EX3 only)/ Video/S-Video. It indicates the input channel when the power is turned on or the INPUT key is pressed. Input-A Signal Sel. Selects the "Component" or "Video GBR" signal input via the INPUT A channel. When a signal is input from a computer, this item is not displayed on the screen because this unit automatically recognizes the signal. Component Color System Selects the color system of the input signal. If you select "Auto," the projector detects the color system of the input signal automatically. If the picture is distorted or colorless, select the color system according to the input signal. Whenever the computer starts, the color system is set to "Auto." Auto Power Saving When set to "On," the projector goes into power saving Off mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. The power saving mode is canceled when a signal is input or any key is pressed. In power saving mode, no keys function for the first 45 seconds after the lamp goes out. 28 The SET SETTING Menu