Sony VPL EX5 User Manual - Page 23

Projecting the Picture / , LCD VGA / , etc.), or by changing your computer's settings. F7 or Fx and Fn Note The key used for switching the computer to output to the projector varies depending on the type of computer. 6 Adjust the upper or lower position of the picture. Use the adjuster to adjust the picture position. Using the adjuster Lift the projector while pressing the adjuster adjustment button, and adjust the tilt of the projector, then release the button to lock the adjuster. For VPL-EW5/EX50/EX5 • When you adjust the tilt of the projector with the adjuster, the V keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the "V Keystone" to "Manual." (See page 38.) • If you set the "V Keystone" to "Auto," the "V Keystone" correction is automatically adjusted. However, it may not be perfectly adjusted depending on the room temperature or the screen angle. In this case, adjust it manually. Press the KEYSTONE key to "V Keystone" displays on the screen, and adjust the value with the v/V/b/B keys. 8 Adjust the size of the picture and the focus. Adjust the picture size using the Zoom ring and adjust the picture focus using the Focus ring. Adjuster adjustment button Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector or do not drag it hard with the adjuster out. It may be occurred malfunction. 7 Adjust the trapezoidal distortion ( ) of the picture. (VPL-ES5 only) Press the KEYSTONE key on the Remote Commander to display the adjustment menu and adjust the tilt using the v/V/b/B keys. Projecting 23