Sony VPL-SW536C Operating Instructions - Page 18
Changing the aspect ratio of the projected image
View all Sony VPL-SW536C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Adjusting the tilt of the projector with the adjusters You can adjust the height of the projector using the adjusters. By changing the tilt of the projector with adjusters, you can adjust the position of the projected image. Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector with the adjuster extended. Changing the aspect ratio of the projected image Press the ASPECT key on the remote commander to change the aspect ratio of the projected image. You can also change the setting in Aspect of the Screen menu (pages 23, 25). Correcting trapezoidal distortion of the projected image (Keystone feature) If the image becomes trapezoidal, set the keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installation menu. 2 Use the V/v/B/b keys to set the value. The higher the value, narrower the top of the projected image. The lower the value, the narrower the bottom. Increase the number towards plus Notes • Since the Keystone adjustment is an electronic correction, the image may be deteriorated. • Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may change from the original or projected image may be distorted with Keystone adjustment. Increase the number towards minus 18 Projecting an Image