Sony VPL-SW536C Operating Instructions - Page 9

B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable. Connecting a Computer Connection with a computer is explained for each input signal. INPUT A/INPUT B For connecting a computer with an RGB output connector. Mini D-sub 15-pin cable (not supplied) Preparation Computer RGB output connector Audio output connector Audio cable (Stereo mini plug) (not supplied) Note It is recommended that you set the resolution of your computer to 1280 × 800 pixels (VPL-SW536C/ SW526C/SW536/SW526) or 1024 × 768 pixels (VPL-SX536) for the external monitor. INPUT C For connecting a computer with an HDMI output connector. HDMI cable (not supplied) Computer HDMI output connector Notes • Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them. • The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal. Connecting the Projector 9