Sony WAHTSA1 Operating Instructions - Page 13
Specifications
View all Sony WAHTSA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• Move away the other components from the surround amplifier or turn off the other components. Operation The system does not work normally. • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. Specifications TA-SA100WR (Surround amplifier) AUDIO POWER SPECIFICATIONS for the US model POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohm loads, both channels driven, from 120 20,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milliwatts to rated output. Amplifier section US models: Surround mode (reference) RMS output power : 143W (per channel at 3 ohms, 1 kHz, 10 % THD) Other models: Stereo mode (rated) 80 W + 80 W (at 3 ohms, 1 kHz, 1 % THD) Surround mode (reference) RMS output power : 143 W (per channel at 3 ohms, 1 kHz, 10 % THD) * Depending on the source, there may be no sound output. Rated impedance: 3 - 16 Ω General Power requirements: North American models: Mexican models: Taiwan models: 120 V AC, 60 Hz 120 V AC, 60 Hz 120 V AC, 50/60 Hz 13US